|
|
|
|
A compact and rugged solution that features our
reliable DV-66 MPEG-2 Player linked to a crisp
10.4” TFT LCD display. The DS-66104 can store and playback full-motion
audio/video clips from high speed CompactFlash®
memory cards (CF) with DVD quality audio/video output; MPEG-1,
MPEG-2, JPEG, and MP3 file formats. This unit is small and light enough
to be wall mounted or integrated into a full size kiosk. A high quality
hardware solution at an affordable price. The unit is available with
or without touch panel.
DS-66104 - w/out touch screen feature
DS-66104T - with touch screen, see
touch screen specification.
..
|
| Benefits: |
| • |
Long term
durability - no moving parts |
| • |
Low maintenance - no tape to rewind |
| • |
Compact design - easy to install |
| • |
Reliable storage
- re-programmable CompactFlash media |
| • |
A high cost effective multimedia hardware solution |
| • |
Available in thermoplastic housing or board
level |
|
| Applications: |
| • |
POP displays
|
| • |
Digital signage systems |
| • |
Interactive kiosks |
| • |
Mobile kiosks
solutions |
| |
|
|
|
| |
• |
10.4" TFT LCD display |
• |
Touch screen option |
• |
Supports multiple format support: MPEG-2, MPEG-1, MP3, and JPEG |
• |
Support CF card and IBM MicroDrive |
• |
Repeat or Menu modes available |
• |
Multiple track selection, up to 99 tracks |
• |
Instant track response |
• |
Stereo audio output |
• |
Auto-start on power on |
• |
Support RS232 Interface TTL control Commands |
| |
|
| Board-Level Features |
• |
Supported S-Video & VGA output |
• |
PIR Connection |
• |
44-pin pitch 2.0mm connection for using 2.5” Hard disk |
• |
Support 16:9 file format |
|
| |
| • |
DS-66104 MPEG-2
player |
| • |
AC adapter with power cord |
|
| |
specification
subject to change without notice
| System Type |
Digital Audio/Video playback |
| Format |
MPEG-1 (VCD), MPEG-2 (DVD), JPEG, MP3, VOB |
| Dimension |
W/housing: 11.25” (L) x 7.812” (W) x 1.812” (H) ; board level: 6" x 4" |
| Power Consumption |
15 Watts |
| Power Supply |
Universal Switching Power Supply Input AC 100/240V, Output DC 12V/3A |
| Operating Current |
1.25Amps @ 12V |
| Operating Voltage |
12 VDC |
| Video Input |
Video, VGA, and S-video input |
| Video Output |
NTSC/PAL, Composite, VGA(DV-66B), and S-video (DV-66B) |
| Audio Output |
Stereo (line level) |
| Storage Format |
High Speed CompactFlash® Card (min. 40X or up)
Data transfer rate is 1X=150KB/sec, 40X=6.0MB/sec |
| Storage Capacity |
128MB and up Compact Flash and MicroDrive |
Contrast Ratio |
300:1 (typical) |
| Brightness |
700 cd/m2 |
| Respond Time |
7ms rise time (typical); 26ms down time (typical) |
| Max. Resolution |
640x480 (VGA) |
| Active Display Area |
211.2mm (H) x 158.4mm (V) |
| Viewing Angle |
120 degree (H); 90 degree (V) (typical) |
| Surface Treatment |
Anti-Reflection treatment of the front polarizer |
| Pixel Pitch |
0.33mm x 0.33mm |
MPEG-1 Est. Avg. Playback
CBR @ 1.35Mbit/sec |
MPEG-1 bitrate vary from 1.15Mbit/sec to 3Mbit/sec
256MB CF holds 25 minutes
512MB CF holds 50 minutes
1GB CF holds 98 minutes/ 1.63 hrs.
2.2GB CF holds 217 minutes/ 3.62 hrs
|
MPEG-2 Est. Avg. Playback
CBR @ 4Mbit/sec |
MPEG-2 bitrate vary from 3Mbit/sec to 15Mbit/sec
256MB CF holds 8.5 minutes
512MB CF holds 17 minutes
1GB CF holds 33 minutes
2.2GB CF holds 73 minutes |
| Touch Screen (optional) |
Active matrix resistive type ( download
DS-66104 User Guide for further details) |
|
| |
Functions: |
| With the
DV-66 accessory you will be able to customize DS-66104
to meet your project's demand. Check out the following functions
it provides: |
|
Factory default settings:
·
Composite video out
· OSD off
· Menu mode |
--> |
Functions options using DV-66F:
1. VGA or Composite video output
2. OSD On or Off
3. Menu or Repeat mode |
|
|
Content
Programming: |
| |
| • |
Have a PC compatible CompactFlash® card
reader ready and connect it to your PC then insert a high
speed CompactFlash® media card (CF). MedeaWiz recommends
an Ultra High Speed (x32 speed) media card. |
| • |
The DV-66 utilizes a 3-digit numbering system
that is easy to set up using your PC’s file manager.
If you want use the repeat mode for continuous track playback
then name your multimedia files starting with 001, then 002
and so forth up to track 099.
In the menu mode use track #000 as the “attract”
file, then track numbers 001, 002, and so forth up to track
number 099 can be set up for immediate playback when a selection
has been made from an input device such as a touch screen
or push button. |
| • |
Using your file manager to simply drag and drop compatible
files from your PC to the Card Reader. DV-66 is compatible
with MPEG-1, MPEG-2, MP3, and JPEG file formats. |
| • |
After transferring your multimedia files onto the CF card,
remove the card and insert into the DV-66 player and your
DV-66 player is ready to play. |
|
|
| |
|
DV-66K, Keypad Controller |
The required interface for connecting and controlling the DV-66 player with an external input device, such as push buttons. There are eight buttons per controller. 4800 baud rate.
See details (PDF) |
| |
|
DV-66F, Function Selector (no longer required by DV-66) |
The DV-66F is a function selector that customizes options for setting up your DV-66 player at a 4800 baud rate. There are eight buttons available on the board.
See details (PDF) |
|
|
Ultra II CompactFlash cards |
| For best result with the DV-66, MedeaWiz recommends using the Ultra II high speed CompactFlash media cards. |
| |
|
PIR Sensor (PCB module) |
Motion sensors, used to detect moving objects, employs a variety of physical effects of a mechanical, electrical, magnetic, acoustic and optical nature; detecting movement from any angle and ideal solution for installations that demand reliable sensing without irritation due to false detection.
See DV-66 series user's guide for details. See details (PDF) |
| |
|
RS232C Interface Cable |
RS-232C interface cable is designed for people looking for an easy-to-use serial port controls.
It allows RS232 port device users to easily control the DV-66 series devices and the cable is the ideal solution for applications where local serial ports command control is required. This makes it suitable for applications such as POP, Kiosk, ATM machines, and other PC-based embedded systems. |
|
| |
|
|
|
